Despite being smaller than other vehicles, motorcycles also require a lot of care and maintenance. One of the parts that need attention is the paint. Thirty minutes is all it takes to make your motorcycle look almost like it came out of the dealer. During those 30 minutes, you can make sure that the paint and graphics on your bike are in full color and are not affected by the sun and inclement weather.
Wash your motorcycle first
Before you start waxing, it is important that you take a few minutes to thoroughly wash your motorcycle to ensure that the wax does not encapsulate contaminants between the protective coating and the paint. This can result in further corrosion and a lot of damage, especially if it comes in contact with metal parts, which causes rust.
Wash the motorcycle carefully, especially if you use a pressure washer. Its pressure can damage the graphics or even the paint of your motorcycle, leaving it with an undesirable appearance.
Graphics are usually damaged if exposed to the sun. They dry out just like plastics, but in this case it is not necessary to apply polish, since with the simple task of waxing the motorcycle, you will protect it and keep the graphics as new for a long time. This will prevent you from replacing them and wasting money.
Waxing the motorcycle
The easiest way to wax your motorcycle is with liquid wax. In addition to simplifying the application and durability, it has benefits such as protection against:
Bird feces
Dust, dirt and sand
Insects
Acid rain
Tartar and salt
The process is simple: spread the liquid wax with a sponge on all the painted and plastic parts of the motorcycle. Make sure that the wax does not reach the engine, as the temperature will burn it and it will emit an unpleasant and toxic odor.
Once you have spread the wax on the body, you should take a clean cloth and remove the excess in a linear direction from top to bottom. Do this with enough force to remove the dried wax that is on the surfaces. This serves to polish the finishes of the motorcycle after it has been waxed.
If you do this every two months, especially on components such as the tank, frame, wheels or other metallic elements, you will leave them as new. Plastic can survive longer without the need for wax, but since you will do it every two months, you will be able to take advantage of the time and do it completely.
Other ways to protect your motorcycle
Motorcycles require constant and adequate maintenance in order to function for longer, without putting your physique or your economy at risk.
For this, we have a large number of suggestions that can help you maintain your motorcycle. If you want to know more about everything that we can advise you, you just need to follow this link.
0 Comments